Home | Company Profile | Water Treatment | OEM Section | Contact Us | Site Map
 
 
TYPICAL PERCENTAGE REMOVAL OF
DISSOLVED IMPURITIES

 
The special features of RO Process is its ability to remove not only the suspended impurities but also dissolved impurities and salts which are harmful to human health and also spoil the taste of water in addition it removes microbiological contamination like bacteria and virus better than the conventional purifiers. Typical Percentage removal of dissolved impurities by Reverse Osmosis are,
 

MATERIAL
ELEMENT

% REMOVED

MATERIAL
ELEMENT

% REMOVED
BARIUM 97% POTASSIUM 92%
BICARBONATE 94% RADIUM 97%
CADMIUM 97% SELENIUM 97%
CALCIUM 97% SILICATE 96%
CHROMATE 92% SILVER 85%
COPPER 97% SODIUM 92%
DETERGENTS 97% STRONTIUM 97%
FLURIDE 90% SULPHATE 97%
LEAD 97% PCBS 97%
MAGNESIUM 97% INSECTICIDES 97%
NICKEL 97% HERBICIDES 97%
NITRATES 80% TOTAL REMOVAL 95%
 

FEATURES OF REVERSE OSMOSIS
WATER PURIFICATION SYSTEM.


  • Thin Film Composite 75 GPD membrane.
  • Five Stage Purification.
  • Hygienic Pressurised 15 Liters Storage Tank.
  • Fully Automatic.
  • Membrane Flushing System.
  • Long Reach Chrome Faucet.
  • All parts are NSF listed.
  • The Pressure Pump is protected and prolonged for a long – term usage.
 
Very Important
 

INLET WATER FEED CONDITION

TDS – Total Dissolved Solids :

1500 PPM Max.

Suspended Solids : < 5 PPM
Turbidity : < 5 NTU
Hardness : < 400 PPM Max.
Manganese, Iron, Hydrogen Sulphide :

< 0.5 PPM

Free Chlorine :

< 0.05 PPM

Oil & Grease : Nil
Water PH :

4 to 10

Temperature : 400 C Max.
Silica (SiO2) : < 20 PPM
 

TECHNICAL SPECIFICATIONS:

Purifying :

Reverse Osmosis

Membrane :

TFC Polyamide

Inlet Pressure (Min.) : 1.0 Kg. / sq. cm.
Rejection of TDS. (Min). : 90% approx.
Recovery (Min.) :

15%

Ele. Supply :

220 V + 10% volts DC
220 V - 10% volts DC

Transformer : Input – 200 V, AC
Output – 24 / 48 volts DC
Booster Pump :

24 / 48 Volts DC

Power Rating : 35/40/70/80 Watts
 

FIVE STAGES OF REVERSE OSMOSIS

 

STAGE I: SEDIMENT FILTER

The 10 micron polypropylene sediment pre-filter to remove suspended materials as sediment, dirt, dust, rust and other suspended impurities down to 10 micron from the water.

STAGE II: ACTIVATED CARBON GRANULE FILTER:

Removes free chlorine and other organic substances, unpleasant colour, tastes & odours from the water and improve quality.

STAGE III: ACTIVATED CARBON BLOCK FILTER:

Removes any additional chlorine and organic substances from the water without release of carbon fines. The carbon block prepare water to enter the RO membrane.

STAGE IV: RO MEMBRANE (0.0001 MICRON):

High rejection (95-99%) thin film composite R.O. Membrane to reject wide spectrum of impurities including Total Dissolved Solids (TDS), bacteria and viruses down to 0.0001 micron.

STAGE V: POLISHING RESIN CARBON FILTER:

Bacteriostatic resin carbon filter dissolved gases bad taste and odour to ensure fresh and natural tasting crystal clean water.

Available Options
  • In-line UV lamp, 0.5-2.0 GPM
  • Booster pump or delivery pump
  • Air-Gap, colored, or designer faucets
  • RO unit with hot/cold water cooler
  • Total Dissolved Solids (TDS) RO comparator
  • Membrane pressure gauge
  • Automatic flushing device
  • 11 gallon storage tank
  • Private labeling
RO/R-121 RO/R-122
 

RO/R-123

RO/R-124
 
RO/R-125 RO/R-126
 
RO/R-127
 

 
Chemtronics R. O. Water Purifier - Residential
Sr. Model Flow Membrane Description
No. No. Rate No. Flow Size  
        GPD GPD  
             
85 RO/R-121 12 1 75 1812 Under Sink Reverse Osmosis
86 RO/R-122 12 1 75 1812 Under Sink Reverse Osmosis with ABS Cover
87 RO/R-123 12 1 75 1812 Under Sink Reverse Osmosis With Pressure Tank
88 RO/R-124 12 1 75 1812 Under Sink Reverse Osmosis With Pressure Tank & ABS Cover
89 RO/R-125 12 1 75 1812 Dolphin Reverse Osmosis Water Prifier With Storage Water Tank
90 RO/R-126 12 1 75 1812 P-TOP Reverse Osmosis Water Prifier With Storage Water Tank
91 RO/R-127 12 1 75 1812 Astroboy Reverse Osmosis Water Prifier With Storage Water Tank

 

Hosted by : MID   Promoted by : GID