1. PRODUCT IDENTIFICATION
Product Name: ECO + BOI generator
Common Names/Synonyms: Triatomic Oxygen + Hydroxyl Radical + Ions
Company : Chemtronics Technologies (India) Pvt. Ltd
# 28, Satyam Industrial Estate, Subhash Road,
Jogeshwari (East). Mumbai – 400 060. INDIA
Telephone: +91-22-2837 9933 | 93212 34527
Email: solution@chemtronicsindia.com
Website: www.chemtronicsindia.com
Product Use: This MSDS is limited to ECO + BOI produced in gaseous form on site by an ECO + BOI generator,
in varying concentrations, in either air or aqueous solution, for the purposes of odor abatement, oxidation
of organic compounds, or antimicrobial intervention, in a variety of applications.
2. HAZARD IDENTIFICATION
| Physical | Health: | Environmental: |
|---|---|---|
| Oxidizing Gas | Skin Irritation – Category 3 Eye Irritation – Category 2B Respiratory System Toxicity – Category 1 (Single & Repeated) |
Acute Aquatic Toxicity – Category I |
NOTE: Severe respiratory toxicity will develop before skin or eye irritation go beyond listed categories. Anyone with chronic pulmonary problems, especially asthma, should avoid exposure to ECO + BOI.
WHMIS Classifications (Workplace Hazardous Materials Information System, Canada): C, D1A, D2A, D2B, F )
Source: CCOHS CHEMINFO Record Number 774
3. COMPOSITION
Chemical name = Ozone + Hydroxyl Radical + Oxygen
Common names = Triatomic oxygen + Hydroxyl Radical + Oxygen
Chemical Formula = O3 + OH + O2
CAS Registry Number = 10028-15-6 + 14280-30-9 + 7782-44-7
4. FIRST AID MEASURES
| Route of Entry | Symptoms | First Aid | |
| Skin Contact | YES | Irritation | Rinse with water |
| Skin Absorption | NO | NA | NA |
| Eye Contact | YES | Irritation | Rinse with water, remove contacts |
| Ingestion | NO | NA | NA |
| Inhalation | YES | Headache, cough, heavy chest, shortness of breath | Remove to fresh air, provide oxygen therapy as needed |
For severe cases, or if symptoms don’t improve, seek medical help.
5. FIRE FIGHTING MEASURES
ECO + BOI itself is not flammable. As a strong oxidant it may accelerate, even initiate, combustion, or cause
explosions. Use whatever extinguishing agents are indicated for the burning materials.
6. ACCIDENTAL RELEASE MEASURES
Turn off the ECO + BOI generator, and ventilate the area. Evacuate until ECO + BOI levels subside to a safe
level (<0.1 ppm)
7. HANDLING AND STORAGE
ECO + BOI must be contained within ECO + BOI -resistant tubing and pipes from the generation point to the
application point.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
OSHA Permissible Exposure Limit: 8 hour TWA 0.1 ppm
ANSI/ASTM: 8 hour TWA 0.1 ppm, STEL 0.3 ppm
ACGIH: 8 hour TWA 0.1 ppm; STEL 0.3 ppm
NIOSH: ELCV 0.1 ppm light; 0.08 ppm moderate; 0.05 ppm, heavy Light, moderate, heavy work TWA <= 2 hours: 0.2 ppm Immediately Dangerous to Life or Health (IDLH) 5 ppm
Respiratory Protection: Use full face self-contained breathing apparatus for entering areas with a high concentration
Engineering control: Use ECO destruct unit for off gassing of ECO.
9. PHYSICAL AND CHEMICAL PROPERTIES
A. ECO| Physical state | Gas | pH | NA |
| Molecular Weight | 48.0 | Decomposition temperature | NA |
| Appearance | Clear at low concentration, blue at higher concentration |
Evaporation rate | NA |
| Odor | Distinct pungent odor | Flash point | NA |
| Odor threshold | 0.02 to 0.05 ppm; exposure desensitizes | Auto-ignition temperature | NA |
| Melting point | -193⁰C/-315⁰F | Relative density | NA |
| Boiling point | -112⁰C/-169⁰F | Partition coefficient | NA |
| Vapor pressure | > 1 atm | Flammability | NA |
| Vapor density | 1.6 (air = 1) | Explosive limits | NA |
| Solubility in water | 570 mg/L @20⁰C & 100% O3; 0.64 @0⁰C |
Viscosity | NA |
| Physical state | Gas | pH | NA |
| Molecular Weight | 48.0 | Decomposition temperature | NA |
| Appearance | Colorless | Evaporation rate | NA |
| Odor | Odorless | Flash point | NA |
| Odor threshold | Nil | Auto-ignition temperature | NA |
| Melting point | -218 ° C/ -361 ° F | Relative density | NA |
| Boiling point | -182 ° C/ -297 ° F | Partition coefficient | NA |
| Vapor pressure | Above critical temp | Flammability | NA |
| Vapor density | 8 | Explosive limits | NA |
| Solubility in water | 40 mg/L @25 °C | Viscosity | NA |
10. STABILITY AND REACTIVITY
ECO + BOI is highly unstable and highly reactive. Avoid contact with oxidizable substances. ECO + BOI will
readily react and spontaneously decompose under normal ambient temperatures.
11. TOXICOLOGICAL INFORMATION
Likely routes of exposure: inhalation, eyes, skin exposure.
Effects of Acute Exposure: Discomfort, including headache, coughing, dry throat, shortness of breath, pulmonary edema; higher levels of exposure intensify symptoms. Possible irritation of skin and/or eyes.
Effects of Chronic Exposure: Similar to acute exposure effects, with possible development of chronic breathing disorders, including asthma.
LC50: mice, 12.6 ppm for 3 hours; hamsters, 35.5 ppm for 3 hours
| Irritancy of Ozone | YES |
| Sensitization to Ozone | NO |
| Carcinogenicity (NTP, IARC, OSHA) | NO |
| Reproductive Toxicity, Teratogenicity, Mutagen city |
Not Proven |
| Toxicologically Synergistic Products | Increased susceptibility to allergens, pathogens, irritants |
12. ECOLOGICAL INFORMATION
The immediate surrounding area may be adversely affected by an ECO + BOI release, particularly plant life.
Discharge of ECO + BOI in water solution may be harmful to aquatic life. Due to natural decomposition,
bioaccumulation will not occur, and the area affected will be limited.
13. DISPOSAL CONSIDERATIONS
Off-gassing of ECO should be through an ECO destruct unit which breaks ECO down to oxygen before release
into the atmosphere.
14. TRANSPORT INFORMATION
NOT APPLICABLE, as ECO + BOI is unstable and either reacts or decomposes, and must be generated at the
location and time of use.
15. REGULATORY INFORMATION
SARA Title III Section 302 EHS TPQ: 100 lbs.
SARA Title III Section 304, EHS RQ: 100 lbs.
SARA Title III Section 313: > 10,000 lbs. used/year.
Source: EPA List of Lists
16. OTHER INFORMATION
Half-life of ECO + BOI in water at 20°C = 20 min; in dry still air at 24°C = 25 hr; decreases significantly with increase in humidity, presence of contaminants, air movement, and/or increase in temperature.
Preparer: Mr. Sunil Shah – Electrical Engineer - Chemtronics
Date of Preparation: 01/April/2020
Disclaimer:
Chemtronics provides this information in good faith, but makes no claim as to its comprehensiveness or
accuracy. It is intended solely as a guide for the safe handling of the product by properly trained personnel,
and makes no representations or warranties, express or implied, of the merchantability or fitness of the
product for any purpose, and Chemtronics will not be responsible for any damages resulting from the use
of, or reliance upon, this information.
Send Enquiry
CONTACT US
Email : solution@chemtronicsindia.com
Phone : +91-22-4006 9933
Mr. Sunil Shah : +91- 932 123 4527
Connect with us on :
